×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerAn intelligent video system’s basic function is the detection of moving objects. Moreover, real-time systems frequently pose limitations for applications involving video processing. Practically, to increase the frame rate or in the case of limited hardware resources, the real-time processing is done on an interested image segment called the region of interest (ROI). Applying the background subtraction (BGS) algorithm to this region is considered the main preprocessing operation. This paper presents a practical study for video processing based on FPGA to detect moving objects using the BGS technique. The proposed algorithm was developed using Verilog hardware description language (HDL), synthesized, and implemented in the programmable logic (PL) part of the ZYBO-7Z010CLG400-1 platform. Finite State Machine (FSM) controller method was used to design the Intellectual Property (IP) module that controls data transfer with BRAM (loading and reading) of the input and reference image. The simulation results of the timing signal sequences of the proposed IP module with the practical test of the BGS to detect several traffic signs of image size (90×90) pixels demonstrate that the module functions as intended. The system that is being presented has a latency of 13.468 nanoseconds, making it appropriate for real-time applications.
In medium voltage and high-power drive applications, pulse width modulation (PWM) techniques are widely used to achieve effective speed control of AC motors. In real-time, an industrial drive system requires reduced hardware complexity and low computation time. The reliability of the AC drive can be improved with the FPGA (field programmable gate array) hardware equipped with digital controllers. To improve the performance of AC drives, a new FPGA-based Wavect real-time prototype controller (Xilinx ZYNQ-7000 SoC) is used to verify the effectiveness of the controller. These advanced controllers are capable of reducing computation time and enhancing the drive performance in real- time applications. The comparative performance analysis is carried out for the most commonly used voltage source inverter (VSI)-based PWM techniques such as sinusoidal pulse width modulation (SPWM) and space vector pulse width modulation (SVPWM) for three-phase, two-level inverters. The comparative study shows the SVPWM technique utilizes DC bus voltage more effectively and produces less harmonic distortion in terms of higher output voltage, flexible control of output frequency, and reduced harmonic distortion at output voltage for motor control applications. The simulation and hardware results are verified and validated by using MATLAB/Simulink software and FPGA-based Wavect real-time controller respectively.
Utilizing Heating PID control systems is common across numerous industries to attain the desired output. Nevertheless, the development in the status of Fractional Order Proportional Integral Derivative Controllers (FOPID) has led to improved control performance and increased degrees of freedom in industrial applications. The paper proposed real-time microwave heating systems which exhibit several challenging characteristics and are complex enough to effectively demonstrate the robustness advantage of fractional (FOPID) over traditional PID controllers. An Adaptive Neuro-Fuzzy Inference System (ANFIS) was modeled using real-time data to assess the effectiveness of conventional PID and FOPID controllers. The results of the study demonstrated that FOPID controllers outperform conventional PID controllers in terms of performance, robustness, stability, flexibility, and faster response. Additionally, the study utilized MATLAB and LabVIEW software to model the Fractional PID controller, the traditional PID controller, and the ANFIS model. The outcomes illustrate that the FOPID controller demonstrates faster rise times (3.8 seconds vs. 6.0 seconds for PID), lower overshoot (1.0oC vs. 2.5oC, and shorter settling times (10 seconds vs. 17 seconds). During setpoint drops, FOPID exhibits reduced undershoot (1.40C compared to 3.2oC) and quicker recovery (5.5 seconds vs. 8.5 seconds). In the final tracking phase, FOPID maintains a lower residual error ( 0.20C vs. 0.7oC) and achieves a steady-state error of 0.1oC, compared to 0.5oC for PID.
This work concerns creating a monitoring system for a smart hospital using Raspberry Pi to measure vital signs. The readings are continually sent to central monitoring units outside the room instead of being beside the patients, to ensure less contacting between the medical staff and patients, also the cloud is used for those who leave the hospital, as the design can track on their medical cases. Data presentation and analysis were accomplished by the LabVIEW program. A Graphical User Interface (GUI) has been created by the Virtual-Instrument (VI) of this program that offer real-time access to monitor patients’ measurements. If unhealthy states are detected, the design triggers alerts and sends SMS message to the doctor. Furthermore, the clinicians can scan a QR code (which is assigned to each patient individually) to access its real-time measurements. The system also utilizes Electrocardiography (ECG) to detect abnormalities and identify specific heart diseases based on its extracted parameters to encourage patients to seek timely medical attention, while aiding doctors in making well-informed decisions. To evaluate the system’s performance, it is tested in the hospital on many patients of different ages and diseases as well. According to the results, the accuracy measurement of SpO2 was about 98.39%, 97.7% for (heart rate) and 98.7% for body temperature. This shows that the system can offer many patients receiving health services from various facilities, and it ensures efficient data management, access control, real-time monitoring, and secure patient information aligning with healthcare standards.
This work presents a wireless communication network (WCN) infrastructure for the smart grid based on the technology of Worldwide Interoperability for Microwave Access (WiMAX) to address the main real-time applications of the smart grid such as Wide Area Monitoring and Control (WAMC), video surveillance, and distributed energy resources (DER) to provide low cost, flexibility, and expansion. Such wireless networks suffer from two significant impairments. On one hand, the data of real- time applications should deliver to the control center under robust conditions in terms of reliability and latency where the packet loss is increased with the increment of the number of industrial clients and transmission frequency rate under the limited capacity of WiMAX base station (BS). This research suggests wireless edge computing using WiMAX servers to address reliability and availability. On the other hand, BSs and servers consume affected energy from the power grid. Therefore, the suggested WCN is enhanced by green self-powered based on solar energy to compensate for the expected consumption of energy. The model of the system is built using an analytical approach and OPNET modeler. The results indicated that the suggested WCN based on green WiMAX BS and green edge computing can handle the latency and data reliability of the smart grid applications successfully and with a self-powered supply. For instance, WCN offered latency below 20 msec and received data reliability up to 99.99% in the case of the heaviest application in terms of data.
Electrical motors have been engaged in many residential, industrial and commercial applications. The speed of an electric motor is an essential output quantity which is needed in many processing systems. Therefore, estimating the speed of an electrical motor is an integral part in the hierarchy of operational and control process. In this work, a new speed estimation method is proposed which is based on a naturally occurring signal; the mechanical vibrations the body of the motor endure during operation. These vibration signals are measured in multi-axial dimension through accelerometer and gyroscope. Furthermore, the collected data is trained in a machine learning model. The model is used subsequently to estimate the speed of a self-excited direct current (DC) motor. Two approaches (offline and onboard) are followed to evaluate the fitness and the performance of the proposed method. The offline approach is performed using regression learner MATLAB toolbox and many algorithms are tested and results with different performance metrics are presented. The algorithm that yields best performance in terms of minimum Root Mean Square and maximum regression factor (R2) is selected as candidate for offline revolutions per minute (rpm) estimation. Results documents that with Gaussian process regression algorithm, estimations are obtained with a mean square error of 7 rpm and an R2 value of 1 which is considered a very satisfactory performance. The second approach is motor speed estimation in real time using vibration signals with deep learning model implemented on limited resources electronic board which is proposed for the first time to the best of our knowledge. The proposed method has been successfully implemented by low consumption resources from the selected board with 6.5 kb of ram and 91ms latency. Even with the limited resources, a rated speed estimate percentage error of 0.18% was recorded from real time results. Moreover, the proposed method is characterized by its simplicity, low technical requirements and eventually low cost of implementation. The aforementioned features make this method an attractive platform for speed estimation in many industrial applications.
Real-time detection and recognition systems for vehicle license plates present a significant design and implementation challenge, arising from factors such as low image resolution, data noise, and various weather and lighting conditions.This study presents an efficient automated system for the identification and classification of vehicle license plates, utilizing deep learning techniques. The system is specifically designed for Iraqi vehicle license plates, adapting to various backgrounds, different font sizes, and non-standard formats. The proposed system has been designed to be integrated into an automated entrance gate security system. The system’s framework encompasses two primary phases: license plate detection (LPD) and character recognition (CR). The utilization of the advanced deep learning technique YOLOv4 has been implemented for both phases owing to its adeptness in real-time data processing and its remarkable precision in identifying diminutive entities like characters on license plates. In the LPD phase, the focal point is on the identification and isolation of license plates from images, whereas the CR phase is dedicated to the identification and extraction of characters from the identified license plates. A substantial dataset comprising Iraqi vehicle images captured under various lighting and weather circumstances has been amassed for the intention of both training and testing. The system attained a noteworthy accuracy level of 95.07%, coupled with an average processing time of 118.63 milliseconds for complete end-to-end operations on a specified dataset, thus highlighting its suitability for real-time applications. The results suggest that the proposed system has the capability to significantly enhance the efficiency and reliability of vehicle license plate recognition in various environmental conditions, thus making it suitable for implementation in security and traffic management contexts.
Growing interests in nature-inspired computing and bio-inspired optimization techniques have led to powerful tools for solving learning problems and analyzing large datasets. Several methods have been utilized to create superior performance-based optimization algorithms. However, certain applications, like nonlinear real-time, are difficult to explain using accurate mathematical models. Such large-scale combination and highly nonlinear modeling problems are solved by usage of soft computing techniques. So, in this paper, the researchers have tried to incorporate one of the most advanced plant algorithms known as Venus Flytrap Plant algorithm(VFO) along with soft-computing techniques and, to be specific, the ANFIS inverse model-Adaptive Neural Fuzzy Inference System for controlling the real-time temperature of a microwave cavity that heats oil. The MATLAB was integrated successfully with the LabVIEW platform. Wide ranges of input and output variables were experimented with. Problems were encountered due to heating system conditions like reflected power, variations in oil temperature, and oil inlet absorption and cavity temperatures affecting the oil temperature, besides the temperature’s effect on viscosity. The LabVIEW design followed and the results figure in the performance of the VFO- Inverse ANFIS controller.
This paper describes the capability of artificial neural network for predicting the critical clearing time of power system. It combines the advantages of time domain integration schemes with artificial neural network for real time transient stability assessment. The training of ANN is done using selected features as input and critical fault clearing time (CCT) as desire target. A single contingency was applied and the target CCT was found using time domain simulation. Multi layer feed forward neural network trained with Levenberg Marquardt (LM) back propagation algorithm is used to provide the estimated CCT. The effectiveness of ANN, the method is demonstrated on single machine infinite bus system (SMIB). The simulation shows that ANN can provide fast and accurate mapping which makes it applicable to real time scenario.
The reluctance of industry to allow wireless paths to be incorporated in process control loops has limited the potential applications and benefits of wireless systems. The challenge is to maintain the performance of a control loop, which is degraded by slow data rates and delays in a wireless path. To overcome these challenges, this paper presents an application–level design for a wireless sensor/actuator network (WSAN) based on the “automated architecture”. The resulting WSAN system is used in the developing of a wireless distributed control system (WDCS). The implementation of our wireless system involves the building of a wireless sensor network (WSN) for data acquisition and controller area network (CAN) protocol fieldbus system for plant actuation. The sensor/actuator system is controlled by an intelligent digital control algorithm that involves a controller developed with velocity PID- like Fuzzy Neural Petri Net (FNPN) system. This control system satisfies two important real-time requirements: bumpless transfer and anti-windup, which are needed when manual/auto operating aspect is adopted in the system. The intelligent controller is learned by a learning algorithm based on back-propagation. The concept of petri net is used in the development of FNN to get a correlation between the error at the input of the controller and the number of rules of the fuzzy-neural controller leading to a reduction in the number of active rules. The resultant controller is called robust fuzzy neural petri net (RFNPN) controller which is created as a software model developed with MATLAB. The developed concepts were evaluated through simulations as well validated by real-time experiments that used a plant system with a water bath to satisfy a temperature control. The effect of disturbance is also studied to prove the system's robustness.
Water scarcity, drought, and population growth accompanying climate change are dangerous factors with serious consequences related to potable water file unless appropriate action is taken urgently to deal with these issues, especially with large populations in the major cities as well as the suburban areas. This work presents an enhanced wide area network for efficient management of the freshwater in the major cities. Hence, it adopts Mosul city as a typical case that contains about 100 residential districts that require 100 sites of water monitoring in the different locations in the city where each site owns three different types of water sensors (water flow, water level, and pressure) in addition to the video surveillance application. The water station sites send the data to the control and monitoring center of the water. The collected data is processed and analyzed by public cloud or private cloud for control and monitoring purposes. The suggested communication network addresses the requirements of the water section applications in terms of monitoring in real-time. This work addresses the WiMAX system as a communication network infrastructure to handle the advantages of resilience, low-cost maintenance, and expansion The suggested network offered excellent behavior in terms of latency (maximum latency is less than 57 msec) and data traffic of the adopted applications.
In recent years, the number of researches in the field of artificial limbs has increased significantly in order to improve the performance of the use of these limbs by amputees. During this period, High-Density surface Electromyography (HD-sEMG) signals have been employed for hand gesture identification, in which the performance of the classification process can be improved by using robust spatial features extracted from HD-sEMG signals. In this paper, several algorithms of spatial feature extraction have been proposed to increase the accuracy of the SVM classifier, while the histogram oriented gradient (HOG) has been used to achieve this mission. So, several feature sets have been extracted from HD-sEMG signals such as; features extracted based on HOG denoted by (H); features have been generated by combine intensity feature with H features denoted as (HI); features have been generated by combine average intensity with H features denoted as (AIH). The proposed system has been simulated by MATLAB to calculate the accuracy of the classification process, in addition, the proposed system is practically validated in order to show the ability to use this system by amputees. The results show the high accuracy of the classifier in real-time which leads to an increase in the possibility of using this system as an artificial hand.
An efficient feedback scheduling scheme based on the proposed Feed Forward Neural Network (FFNN) scheme is employed to improve the overall control performance while minimizing the overhead of feedback scheduling which exposed using the optimal solutions obtained offline by mathematical optimization methods. The previously described FFNN is employed to adapt online the sampling periods of concurrent control tasks with respect to changes in computing resource availability. The proposed intelligent scheduler will be examined with different optimization algorithms. An inverted pendulum cost function is used in these experiments. Then, simulation of three inverted pendulums as intelligent Real Time System (RTS) is described in details. Numerical simulation results demonstrates that the proposed scheme can reduce the computational overhead significantly while delivering almost the same overall control performance as compared to optimal feedback scheduling
Aiming to enhance the accuracy of sign classification in sign language (SL), this research presents an innovative approach that combines hand-engineered characteristics with deep learning (DL) algorithms. The focus is on American Sign Language (ASL), a critical communication tool for the deaf and hard-of-hearing community. The goal is to bridge the existing communication chasm between SL users and the general public by designing a real-time SL recognition system that allows non- SL users to converse with the hearing-impaired individuals. The application and assessment of various machine learning (ML) models, such as VGG19, DenseNet, ResNet50, MobileNet, and NASNetMobile, yielded promising outcomes with superior evalu- ation metrics. These models exhibit utility in the classification of ASL signs as they can differentiate between diverse hand gestures with high accuracy (ACC). The paper highlights the potential of these models across an array of ASL recognition applica- tions, considering factors like computational resources, model dimension, and real-time functionality. The findings endorse the application of ML techniques in SL interpretation, promoting inclusive communication for those with hearing impairment.
In this paper we present the details of methodology pursued in implementation of an HMI and Demo Temperature Monitoring application for wireless sensor-based distributed control systems. The application of WSN for a temperature monitoring and control is composed of a number of sensor nodes (motes) with a networking capability that can be deployed for monitoring and control purposes. The temperature is measured in the real time by the sensor boards that sample and send the data to the monitoring computer through a base station or gateway. This paper proposes how such monitoring system can be setup emphasizing on the aspects of low cost, energy-efficient, easy ad-hoc installation and easy handling and maintenance. This paper focuses on the overall potential of wireless sensor nodes and networking in industrial applications. A specific case study is given for the measurement of temperature (with thermistor or thermocouple), humidity, light and the health of the WSN. The focus was not on these four types of measurements and analysis but rather on the design of a communication protocol and building of an HMI software for monitoring. So, a set of system design requirements are developed that covered the use of the wireless platforms, the design of sensor network, the capabilities for remote data access and management, the connection between the WSN and an HMI software designed with MATLAB.
This paper presents a new strategy of sticky bomb detection. The detection strategy is based on measuring the magnetic field around the targeted car using compass device. A compass measure the earth gravitation of the car as (x,y,z) coordination , a threshold value of magnetic fields around the targeted car are recorded. If a difference is detected with any (x,y,z) coordination, an alert SMS message is sent to the car's owner. The detection system presented in this paper has been implemented based on Arduino board. The alarm signal is a Short Message Service (SMS) through Global System for Mobile Communication (GSM) module. The proposed method can gives the people of unstable countries a chance to discover whether their cars have been trapped with an IED bomb or their car still safe.
The demand for a secured web storage system is increasing daily for its reliability which ensures data privacy and confidentiality. The proposed paper aims to find the most secure ways to maintain integrity and protect privacy and security in healthcare management systems. The Advanced Encryption Standard (AES) algorithm is used to encrypt data transferred by providing a means to check the integrity of information transmitted and make it more immune to cyberattack techniques, this was implemented by using Keyed-Hash Message Authentication Code (HMAC) and Secured Hash Algorithm-256 (SHA-256). The risk of exposure to attackers can be avoided by using honeypot systems combined with Intrusion detection systems (IDSs) as a firewall system is not effective against such attacks alone. The experimental results evaluate the proposed security health information management system by comparing the performance of the encryption algorithm based on encryption time, memory and CPU usage, and entropy for different plaintext lengths. In addition, it can be seen that when changing the AES key size, more memory and time are required the longer the key size is used. The 128 bits AES key is therefore advised if the system must operate in hard real-time.
The Internet of Things (IoT) has become a major enabler for sustainable development and has begun to have an impact on society as a whole. Marshes are significant ecosystems for the environment that are essential to biodiversity support and ecological equilibrium. However, environmental changes and human activity are posing an increasing threat to these fragile ecosystems. An Internet of Things (IoT)-based marsh monitoring system was created and put into operation to gather data in real-time on a variety of environmental factors, such as wind speed, CO2 and hydrogen levels, temperature, humidity, voltage, and current. The system makes use of a network of sensors spread out throughout the marsh, which may promote sustainable development. send data to a central node for processing before sending it to a platform hosted in the cloud. After that, an interactive online application is used to visualize the data, giving stakeholders important information about the condition and health of the marsh. Because the suggested system makes it possible to monitor and manage marsh ecosystems effectively, it may promote sustainable development.
The autonomous navigation of robots is an important area of research. It can intelligently navigate itself from source to target within an environment without human interaction. Recently, algorithms and techniques have been made and developed to improve the performance of robots. It’s more effective and has high precision tasks than before. This work proposed to solve a maze using a Flood fill algorithm based on real time camera monitoring the movement on its environment. Live video streaming sends an obtained data to be processed by the server. The server sends back the information to the robot via wireless radio. The robot works as a client device moves from point to point depends on server information. Using camera in this work allows voiding great time that needs it to indicate the route by the robot.
Autonomous mobile robots (AMRs) are becoming increasingly important in different domains such as healthcare, warehouse automation and household duties, but still encounter problems when it comes to moving around unfamiliar and dynamic environments. This study proposes an advanced robotic navigation system which combines the Soft Actor-Critic (SAC) approach and Vector Field Histogram (VFH) for path planning and avoidance obstacles in completely unknown environments. This system leverages the strengths of deep reinforcement learning and real-time obstacle detection to achieve robust and efficient navigation in certain scenarios. The SAC strategy optimizes robot navigation using policy networks and Q-networks, while the VFH method addresses obstacle avoidance by sensor data processing and dynamically adjusting the robot’s angular velocity to avoid collision. For testing and implementing this system, Gazebo simulation and Robot Operating System (ROS) are used. Experimental results demonstrated that the proposed method outperformed the standard technique and achieved a high success rate in path planning and obstacles avoidance.
As a key type of mobile robot, the two-wheel mobile robot has been developed rapidly for varied domestic, health, and industrial applications due to human-like movement and balancing characteristics based on the inverted pendulum theory. This paper presents a developed Two-Wheel Self-Balanced Robot (TWSBR) model under road disturbance effects and simulated using MATLAB Simscape Multibody. The considered physical-mechanical structure of the proposed TWSBS is connected with a Simulink controller scheme by employing physical signal converters to describe the system dynamics efficiently. Through the Simscape environment, the TWSBR motion is visualized and effectively analyzed without the need for complicated analysis of the associated mathematical model. Besides, 3D visualization of real-time behavior for the implemented TWSBR plant model is displayed by Simulink Mechanics Explorer. Robot balancing and stability are achieved by utilizing Proportional Integral Derivative (PID) and Linear Quadratic Regulator (LQR) controllers' approaches considering specific control targets. A comparative study and evaluation of both controllers are conducted to verify the robustness and road disturbance rejection. The realized performance and robustness of developed controllers are observed by varying object-carrying loaded up on mechanical structure layers during robot motion. In particular, the objective weight is loaded on the robot layers (top, middle, and bottom) during disturbance situations. The achieved findings may have the potential to extend the deployment of using TWSBRs in the varied important application.
In this paper, explicit model predictive controller is applied to an inverted pendulum apparatus. Explicit solutions to constrained linear model predictive controller can be computed by solving multi-parametric quadratic programs. The solution is a piecewise affine function, which can be evaluated at each sample to obtain the optimal control law. The on-line computation effort is restricted to a table-lookup. This admits implementation on low cost hardware at high sampling frequencies in real-time systems with high reliability and low software complexity. This is useful for systems with limited power and CPU resources.
Hand gesture recognition is a quickly developing field with many uses in human-computer interaction, sign language recognition, virtual reality, gaming, and robotics. This paper reviews different ways to model hands, such as vision-based, sensor-based, and data glove-based techniques. It emphasizes the importance of accurate hand modeling and feature extraction for capturing and analyzing gestures. Key features like motion, depth, color, shape, and pixel values and their relevance in gesture recognition are discussed. Challenges faced in hand gesture recognition include lighting variations, complex backgrounds, noise, and real-time performance. Machine learning algorithms are used to classify and recognize gestures based on extracted features. The paper emphasizes the need for further research and advancements to improve hand gesture recognition systems’ robustness, accuracy, and usability. This review offers valuable insights into the current state of hand gesture recognition, its applications, and its potential to revolutionize human-computer interaction and enable natural and intuitive interactions between humans and machines. In simpler terms, hand gesture recognition is a way for computers to understand what people are saying with their hands. It has many potential applications, such as allowing people to control computers without touching them or helping people with disabilities communicate. The paper reviews different ways to develop hand gesture recognition systems and discusses the challenges and opportunities in this area.
IoHT has several benefits for real-time smart healthcare, but because of its limited processing power, storage capacity, and self-defense capabilities, security issues are growing. Although newer blockchain-based authentication solutions have strong security features due to their tamper-resistant decentralized architecture, they come with a high resource cost, requiring a lot of processing power, more storage, and time-consuming authentication procedures. As such, these difficulties provide barriers to reaching the ideal levels of scalability and temporal efficiency, which are essential for the efficient functioning of large-scale, time-sensitive IoHT systems. To solve these challenges, this paper presents an authentication approach designed especially for IoHT systems. Our work consists four-phase process, which includes setting, registration, login and authentication, and HERs Exchange data. To enhance both efficiency and scalability, the proposed scheme employs a combination of 3-D map dimensions chaotic-based public key cryptosystems, and blockchain-based, fog computing technologies and IPFS. We simulate the proposed work to implement health electronic record (HER) by the Ethereum platform and solidity language, the simulation experiments were tested using the JMeter tool. Showed that the key generation time for chaotic-based is faster than (ECC)—furthermore, the average latency ≈ 3.7 ms. A security analysis of the proposed scheme was implemented by the Scyther tool. The formal security analysis demonstrated that the proposed scheme is secured against potential attacks and supports the scalability of the IoHT system.
A Programmable logic controller (PLC) uses the digital logic circuits and their operating concepts in its hardware structure and its programming instructions and algorithms. Therefore, the deep understanding of these two items is staple for the development of control applications using the PLC. This target is only possible through the practical sensing of the various components or instructions of these two items and their applications. In this work, a user-friendly and re-configurable ladder, digital logic learning and application development design and testing platform has been designed and implemented using a Programmable Logic Controller (PLC), Human Machine Interface panel (HMI), four magnetic contactors, one Single-phase power line controller and one Variable Frequency Drive (VFD) unit. The PLC role is to implement the ladder and digital logic functions. The HMI role is to establish the virtual circuit wiring and also to drive and monitor the developed application in real time mode of application. The magnetic contactors are to play the role of industrial field actuators or to link the developed application control circuit to another field actuator like three phase induction motor. The Single -phase power line controller is to support an application like that of the soft starter. The VFD is to support induction motor driven applications like that of cut-to-length process in which steel coils are uncoiled and passed through cutting blade to be cut into required lengths. The proposed platform has been tested through the development of 14 application examples. The test results proved the validity of the proposed platform.
The Fast Fourier Transform (FFT) and Inverse FFT(IFFT) are used in most of the digital signal processing applications. Real time implementation of FFT/IFFT is required in many of these applications. In this paper, an FPGA reconfigurable fixed point implementation of FFT/IFFT is presented. A manually VHDL codes are written to model the proposed FFT/IFFT processor. Two CORDIC-based FFT/IFFT processors based on radix-2and radix-4 architecture are designed. They have one butterfly processing unit. An efficient In-place memory assignment and addressing for the shared memory of FFT/IFFT processors are proposed to reduce the complexity of memory scheme. With "in-place" strategy, the outputs of butterfly operation are stored back to the same memory location of the inputs. Because of using DIF FFT, the output was to be in reverse order. To solve this issue, we have re-use the block RAM that used for storing the input sample as reordering unit to reduce hardware cost of the proposed processor. The Spartan-3E FPGA of 500,000 gates is employed to synthesize and implement the proposed architecture. The CORDIC based processors can save 40% of power consumption as compared with Xilinx logic core architectures of system generator.
In this paper describes the operation of power system networks to be nearest to stability rated values limits. State estimation for monitoring and protection power system is very important because it provides a real-time (RT) Phase angle of different nodes of accuracy and then analysis and decided to choose control way (methods). In order to detect the exact situation (instant state) for power system networks parameters. In this paper proposes a new monitoring and analysis system state estimation method integrating with MATLAB environment ability, by using phasor measurement units (PMU's) technology, by this system the estimation problem, iterations numbers, and processing time will reduce. The measurements of phasors value of voltage signal and current estimated and analyzed. Mat lab/PSAT package use as a tool to design and simulate four electrical power systems networks such as INSG 24 buses, IEEE14 bus, Diyala city 10buses (IRAQ), and IEEE6 bus and then installed and applied PMU’s devices to each system. Simulation results show that the PMU's performances effectiveness appear clearly. All results show the validation of PMU’s devices as an estimator to power system networks states and a significant improvement in the accuracy of the calculation of network status. All results achieved and discussed through this paper setting up mathematical models with Graph Theoretic Procedure algorithm.
Recently, chaos theory has been widely used in multimedia and digital communications due to its unique properties that can enhance security, data compression, and signal processing. It plays a significant role in securing digital images and protecting sensitive visual information from unauthorized access, tampering, and interception. In this regard, chaotic signals are used in image encryption to empower the security; that’s because chaotic systems are characterized by their sensitivity to initial conditions, and their unpredictable and seemingly random behavior. In particular, hyper-chaotic systems involve multiple chaotic systems interacting with each other. These systems can introduce more randomness and complexity, leading to stronger encryption techniques. In this paper, Hyper-chaotic Lorenz system is considered to design robust image encryption/ decryption system based on master-slave synchronization. Firstly, the rich dynamic characteristics of this system is studied using analytical and numerical nonlinear analysis tools. Next, the image secure system has been implemented through Field-Programmable Gate Arrays (FPGAs) Zedboard Zynq xc7z020-1clg484 to verify the image encryption/decryption directly on programmable hardware Kit. Numerical simulations, hardware implementation, and cryptanalysis tools are conducted to validate the effectiveness and robustness of the proposed system.
Face recognition is the technology that verifies or recognizes faces from images, videos, or real-time streams. It can be used in security or employee attendance systems. Face recognition systems may encounter some attacks that reduce their ability to recognize faces properly. So, many noisy images mixed with original ones lead to confusion in the results. Various attacks that exploit this weakness affect the face recognition systems such as Fast Gradient Sign Method (FGSM), Deep Fool, and Projected Gradient Descent (PGD). This paper proposes a method to protect the face recognition system against these attacks by distorting images through different attacks, then training the recognition deep network model, specifically Convolutional Neural Network (CNN), using the original and distorted images. Diverse experiments have been conducted using combinations of original and distorted images to test the effectiveness of the system. The system showed an accuracy of 93% using FGSM attack, 97% using deep fool, and 95% using PGD.
A theoretical analysis is presented to calculate the signal phase shift and the gain coefficient associated with two-wave mixing in photorefractive crystals subjected to an external electric field. The relative position of the induced-refractive index grating with respect to the fringe pattern of the two input optical beams leads to a coupling effect between the phase and intensity of these beams. An optical logic operation system that is based on photorefractive two-wave mixing is introduced. This system uses the fringe-shifting techniques that are executed by a Mach-Zehnder interferometer. The proposed system configurations are capable of producing all the basic 16 two-operand Boolean functions simultaneously at different output planes.
Lately, image encryption has stand out as a highly urgent demand to provide high security for digital images against use and unauthorized distribution. A lot of existing researches use chaotic systems, symmetric or asymmetric schemes for image encryption, but cryptosystem based on one encryption technique only, faces many challenges like weak security and low complexity. Therefore, incorporating two or more different ciphering methods yields a secure and efficient algorithm to protect image information. In this work, a new image cryptosystem is suggested by joining zigzag scan technique, RSA algorithm and chaotic systems. These three security factors introduce Triple Incorporated Ciphering stages system (TIC). Initially, the plaintext image is divided into 8 × 8 non-overlapping blocks, then the odd blocks are isolated from the even blocks. After that, a new modified zigzag scan in two different directions is adopted for shuffling pixels in the odd and even blocks. This operation effectively enhances the shuffling degree. Next, the RSA algorithm is utilized after combining the scrambled blocks in one matrix. Finally, chaotic systems are implemented on the resultant encrypted matrix to complete the ciphering process. The chaos is implemented in two steps; confusion and diffusion. Duffing map is exploited in the confusion stage, whereas L¨u system is adopted on the shuffled matrix in the diffusion stage. The simulation results show the superiority of TIC in both security and attacks robustness compared to other cryptographic algorithms. Therefore, TIC can be exploited in real-time communication systems for secure image transmission.
This work presents a healthcare monitoring system that can be used in an intensive care room. Biological information represented by ECG signals is achieved by ECG acquisition part . AD620 Instrumentation Amplifier selected due to its low current noise. The ECG signals of patients in the intensive care room are measured through wireless nodes. A base node is connected to the nursing room computer via a USB port , and is programmed with a specific firmware. The ECG signals are transferred wirelessly to the base node using nRF24L01+ wireless module. So, the nurse staff has a real time information for each patient available in the intensive care room. A star Wireless Sensor Network is designed for collecting ECG signals . ATmega328 MCU in the Arduino Uno board used for this purpose. Internet for things used For transferring ECG signals to the remote doctor, a Virtual Privet Network is established to connect the nursing room computer and the doctor computer . So, the patients information kept secure. Although the constructed network is tested for ECG monitoring, but it can be used to monitor any other signals. INTRODUCTION For elderly people, or the patient suffering from the cardiac disease it is very vital to perform accurate and quick diagnosis. Putting such person under continuous monitoring is very necessary. (ECG) is one of the critical health indicators that directly bene ¿ t from long-term monitoring. ECG signal is a time-varying signal representing the electrical activity of the heart. It is an effective, non- invasive diagnostic tool for cardiac monitoring[1]. In this medical field, a big improvement has been achieved in last few years. In the past, several remote monitoring systems using wired communications were accessible while nowadays the evolution of wireless communication means enables these systems to operate everywhere in the world by expanding internet benefits, applications, and services [2]. Wireless Sensor Networks (WSNs), as the name suggests consist of a network of wireless nodes that have the capability to sense a parameter of interest like temperature, humidity, vibration etc[3,4]. The health care application of wireless sensory network attracts many researches nowadays[ 5-7] . Among these applications ECG monitoring using smart phones[6,8], wearable Body sensors[9], remote patient mentoring[10],...etc. This paper presents wireless ECG monitoring system for people who are lying at intensive care room. At this room ECG signals for every patient are measured using wireless nodes then these signals are transmitted to the nursing room for remote monitoring. The nursing room computer is then connected to the doctors computer who is available at any location over the word by Virtual Privet Network (VPN) in such that the patients information is kept secure and inaccessible from unauthorized persons. II. M OTE H ARDWARE A RCHITECTURE The proposed mote as shown in Fig.1 consists of two main sections : the digital section which is represented by the Arduino UNO Board and the wireless module and the analog section. The analog section consists of Instrumentation Amplifier AD620 , Bandpass filter and an operational amplifier for gain stage, in addition to Right Leg Drive Circuit. The required power is supplied by an internal 3800MAH Lithium-ion (Li-ion) battery which has 3.7V output voltage.
The advancement of pressure sensors customized for purposes marks notable progress, in healthcare diagnostics and patient supervision. This article delves into creating and assessing of a capacitive pressure sensor designed to measure physiological pressures with utmost accuracy and sensitivity. The sensor’s structure integrates materials compatible with the body to ensure safety and dependability when interacting with bodily tissues. Thorough simulations and validations showcase the sensors performance emphasizing its responsiveness across various pressures in medical settings. The assessment encompasses an analysis of the sensor’s sensitivity at (12.4 fF/mmHg) exceptional linearity within a nonlinearity range of ±0.015% with a small diaphragm diameter (0.5 mm) and long-term reliability. The results indicate that the suggested capacitive pressure sensor exhibits promising possibilities for use in fields like blood pressure monitoring, intracranial pressure measurement and other crucial areas of biomedicine, providing a nonintrusive and cost-efficient method, for real-time health monitoring and diagnostic purposes.
The monitoring of COVID-19 patients has been greatly aided by the Internet of Things (IoT). Vital signs, symptoms, and mobility data can be gathered and analyzed by IoT devices, including wearables, sensors, and cameras. This information can be utilized to spot early infection symptoms, monitor the illness’s development, and stop the virus from spreading. It’s critical to take vital signs of hospitalized patients in order to assess their health. Although early warning scores are often calculated three times a day, they might not indicate decompensation symptoms right away. Death rates are higher when deterioration is not properly diagnosed. By employing wearable technology, these ongoing assessments may be able to spot clinical deterioration early and facilitate prompt therapies. This research describes the use of Internet of Things (IoT) to follow fatal events in high-risk COVID-19 patients. These patients’ vital signs, which include blood pressure, heart rate, respiration rate, blood oxygen level, and fever, are taken and fed to a central server on a regular basis so that information may be processed, stored, and published instantly. After processing, the data is utilized to monitor the patients’ condition and send Short Message Service (SMS) alerts when the patients’ vital signs rise above predetermined thresholds. The system’s design, which is based on two ESP32 controllers, sensors for the vital signs listed above, and a gateway, provides real-time reports, high-risk alerts, and patient status information. Clinicians, the patient’s family, or any other authorized person can keep an eye on and follow the patient’s status at any time and from any location. The main contribution in this work is the designed algorithm used in the gateway and the manner in which this gateway collects, analyze, process, and send the patient’s data to the IoT server from one side and the manner in which the gateway deals with the IoT server in the other side. The proposed method leads to reduce the cost and the time the system it takes to get the patient’s status report.
Path planning is an essential concern in robotic systems, and it refers to the process of determining a safe and optimal path starting from the source state to the goal one within dynamic environments. We proposed an improved path planning method in this article, which merges the Dijkstra algorithm for path planning with Potential Field (PF) collision avoidance. In real-time, the method attempts to produce multiple paths as well as determine the suitable path that’s both short and reliable (safe). The Dijkstra method is employed to produce multiple paths, whereas the Potential Field is utilized to assess the safety of each route and choose the best one. The proposed method creates links between the routes, enabling the robot to swap between them if it discovers a dynamic obstacle on its current route. Relating to path length and safety, the simulation results illustrate that Dynamic Dijkstra-Potential Field (Dynamic D-PF) achieves better performance than the Dijkstra and Potential Field each separately, and going to make it a promising solution for the application of robotic automation within dynamic environments.
Global agriculture employs central pivot irrigation system(CPIS) as a highly significant method for intelligent irrigation. Cultivating crucial crops like wheat and other strategically important crops that occupy extensive land areas contributes to global food security. The Central Pivot Irrigation System encounters technical issues that result in malfunctions in its automatic control system. These malfunctions occasionally cause damage to the primary pipes and towers that operate the system, resulting in significant material losses for farmers and agricultural crops. Moreover, the repair process is time-consuming. Therefore, to address this issue, this study employed the YOLOv5 models to accurately identify and detect defects in the CPIS machine by determining whether they are in a safe or dangerous state. The dataset that was used in this study was gathered from agricultural areas in Salah al-Din Governorate. The CPIS detection model yielded the following results: the grayscale color system with Yolov5n achieved a 98 % detection rate with accuracy and F1-score values of 0.866. Similarly, Yolov5m achieved a 98 % detection rate with accuracy and F1-score values of 0.804. In the RGB color system, the maximum results achieved with Yolov5n are 97 % for accuracy and 0.812 for F1-score. On the other hand, Yolov5s6 achieves a result of 95 % for accuracy and 0.82 for both F1-score and accuracy. Based on the aforementioned outcome, we can infer that yolov5s6 accurately detects the CPIS in both its safe and dangerous states. Therefore, they can be deployed in a real-time system for CPIS defect monitoring and control systems.
Many assistive devices have been developed for visually impaired (VI) person in recent years which solve the problems that face VI person in his/her daily moving. Most of researches try to solve the obstacle avoidance or navigation problem, and others focus on assisting VI person to recognize the objects in his/her surrounding environment. However, a few of them integrate both navigation and recognition capabilities in their system. According to above needs, an assistive device is presented in this paper that achieves both capabilities to aid the VI person to (1) navigate safely from his/her current location (pose) to a desired destination in unknown environment, and (2) recognize his/her surrounding objects. The proposed system consists of the low cost sensors Neato XV-11 LiDAR, ultrasonic sensor, Raspberry pi camera (CameraPi), which are hold on a white cane. Hector SLAM based on 2D LiDAR is used to construct a 2D-map of unfamiliar environment. While A* path planning algorithm generates an optimal path on the given 2D hector map. Moreover, the temporary obstacles in front of VI person are detected by an ultrasonic sensor. The recognition system based on Convolution Neural Networks (CNN) technique is implemented in this work to predict object class besides enhance the navigation system. The interaction between the VI person and an assistive system is done by audio module (speech recognition and speech synthesis). The proposed system performance has been evaluated on various real-time experiments conducted in indoor scenarios, showing the efficiency of the proposed system.
Health Information Technology (HIT) provides many opportunities for transforming and improving health care systems. HIT enhances the quality of health care delivery, reduces medical errors, increases patient safety, facilitates care coordination, monitors the updated data over time, improves clinical outcomes, and strengthens the interaction between patients and health care providers. Living in modern large cities has a significant negative impact on people's health, for instance, the increased risk of chronic diseases such as diabetes. According to the rising morbidity in the last decade, the number of patients with diabetes worldwide will exceed 642 million in 2040, meaning that one in every ten adults will be affected. All the previous research on diabetes mellitus indicates that early diagnoses can reduce death rates and overcome many problems. In this regard, machine learning (ML) techniques show promising results in using medical data to predict diabetes at an early stage to save people's lives. In this paper, we propose an intelligent health care system based on ML methods as a real-time monitoring system to detect diabetes mellitus and examine other health issues such as food and drug allergies of patients. The proposed system uses five machine learning methods: K-Nearest Neighbors, Naïve Bayes, Logistic Regression, Random Forest, and Support Vector Machine (SVM). The system selects the best classification method with high accuracy to optimize the diagnosis of patients with diabetes. The experimental results show that in the proposed system, the SVM classifier has the highest accuracy of 83%.