This article emphasizes on a strategy to design a Super Twisting Sliding Mode Control (STSMC) method. The proposed controller depends on the device of Field Programmable Gate Array (FPGA) for controlling the trajectory of robot manipulator. The gains of the suggested controller are optimized using Chaotic Particle Swarm Optimization (PSO) in MATLAB toolbox software and Simulink environment. Since the control systems speed has an influence on their stability requirements and performance, (FPGA) device is taken in consideration. The proposed control method based on FPGA is implemented using Xilinx block sets in the Simulink. Integrated Software Environment (ISE 14.7) and System Generator are employed to create the file of Bitstream which can be downloaded in the device of FPGA. The results show that the designed controller based of on the FPGA by using System Generator is completely verified the effectiveness of controlling the path tracking of the manipulator and high speed. Simulation results explain that the percentage improvement in the Means Square Error (MSEs) of using the STSMC based FPGA and tuned via Chaotic PSO when compared with the same proposed controller tuned with classical PSO are 17.32 % and 13.98 % for two different cases of trajectories respectively.
Due to the changing flow conditions during the pipeline's operation, several locations of erosion, damage, and failure occur. Leak prevention and early leak detection techniques are the best pipeline risk mitigation measures. To reduce detection time, pipeline models that can simulate these breaches are essential. In this study, numerical modeling using COMSOL Multiphysics is suggested for different fluid types, velocities, pressure distributions, and temperature distributions. The system consists of 12 meters of 8-inch pipe. A movable ball with a diameter of 5 inches is placed within. The findings show that dead zones happen more often in oil than in gas. Pipe insulation is facilitated by the gas phase's thermal inefficiency (thermal conductivity). The fluid mixing is improved by 2.5 m/s when the temperature is the lowest. More than water and gas, oil viscosity and dead zones lower maximum pressure. Pressure decreases with maximum velocity and vice versa. The acquired oil data set is utilized to calibrate the Support Vector Machine and Decision Tree techniques using MATLAB R2021a, ensuring the precision of the measurement. The classification result reveals that the Support Vector Machine (SVM) and Decision Tree (DT) models have the best average accuracy, which is 98.8%, and 99.87 %, respectively.
Growing interests in nature-inspired computing and bio-inspired optimization techniques have led to powerful tools for solving learning problems and analyzing large datasets. Several methods have been utilized to create superior performance-based optimization algorithms. However, certain applications, like nonlinear real-time, are difficult to explain using accurate mathematical models. Such large-scale combination and highly nonlinear modeling problems are solved by usage of soft computing techniques. So, in this paper, the researchers have tried to incorporate one of the most advanced plant algorithms known as Venus Flytrap Plant algorithm(VFO) along with soft-computing techniques and, to be specific, the ANFIS inverse model-Adaptive Neural Fuzzy Inference System for controlling the real-time temperature of a microwave cavity that heats oil. The MATLAB was integrated successfully with the LabVIEW platform. Wide ranges of input and output variables were experimented with. Problems were encountered due to heating system conditions like reflected power, variations in oil temperature, and oil inlet absorption and cavity temperatures affecting the oil temperature, besides the temperature’s effect on viscosity. The LabVIEW design followed and the results figure in the performance of the VFO- Inverse ANFIS controller.